大流量混流泵价格-混流泵价格-泰安金石泵业

开车顺序：

    1、关闭出口闸阀

    2、将水注入水泵，以排除进水管及泵内空气，不锈钢混流泵价格，可从泵体顶端引水杯注入清水，也可用真空泵注水（开动真空泵，排除水泵及管内气体在水充满水泵的同时，起动水泵，打开闸阀，停止真空泵）。

3、开启电动机（注意水泵的旋转方向）。

    4、当电动机正常运转后，逐步开大闸阀，达到所要求的工况后，调节填料松紧。若水泵运转，轴承温度等都正常，移动式混流泵价格，则可继续运行。

iii.  starting

sequence

   1.close the oulet

sluice valve.

   2. inject

water into pump to remove the air in water-in pipe&pump which can realized

by injecting clear water from the water diversion cup of the pump body end or

by vacuum pump(start the vacuum pump， remove the air from pump&pipes，大流量混流泵价格， start

the water pump when the pump is full of water， open the sluice valve， stop the

vacuum pump).

   3. start the

motor(pay more attention on the rotation direction of pump)

   4. when the motor runs normally， turn up the

sluice valve gradually， adjust the tightness of padding when gettng to the

required working condition.if the pump runs well， the temperature of bearing is

normal，&it can run sequentially.