工业混流泵供应商-兴义市混流泵供应商-泰安金石泵业

（二）开车前准备：

1、检查地脚螺栓的坚固情况。

2、检查传动皮带松紧程度及安装设备是否安装妥善。

3、检查进、出水管是否进气、漏水。

4、检查填料松紧是否适宜。

5、检查电动机和水泵轴心线是否在同一直线上，直联时，电动机旋转方向是否符合泵的旋转方向。

6、检查泵内有无障碍，轴是否卡住，兴义市混流泵供应商，用手转动应轻无杂音。

ii. preparation before starting

1. check the foundation bolts if they are firm.

2. check the degree of tightness of drive belt&check the

installation if it is suitable.

3.check the water–in&outpipes if they are leaking water&air.

4.check the degeree of tightness of padding if it is suitable.

    5.check the

motor&pump axile lead if they are in the same line&check the direction

of rotation of motor if it is the same with the rotation direction of pump.

    6.check the

pump if there are barriers ， if the axile locks， there should be no noises when

turing it by hand.